Build Your Future!
This automatic screw press for oil extraction mostly consists of four parts: feeder, press chamber, electrical control and two vacuum filter drum. Compared to the screw oil press machine, the vacuum filter drum is the biggest difference. They make oil cleaner, the quantity and quality of oil will also rise. What’s more, this vegetable oil extraction machine is suitable for both cold pressing and hot pressing.
Parameters of the Multifunction Screw Press Oil Extraction
| Model | Power(KW) | Capacity(KG/H) | Dimension(MM) | Weight(KG) |
|---|---|---|---|---|
| YZS-30 | 1.5 kw | 15 kg/h | 900*900*1100 mm | 156 kg |
| YZS-60 | 2.2 kw | 30 kg/h | 600*650*880 mm | 210 kg |
| YZS-70 | 4 kw | 30 kg/h | 1000*1000*1250 mm | 256 kg |
| YZS-80A | 5.5+0.75 kw | 100 kg/h | 1890*1160*1790 mm | 700 kg |
| YZS-95A | 7.5+1.5 kw | 150-200 kg/h | 2100*1200*1890 mm | 900 kg |
| YZS-100A | 7.5+1.1 kw | 200 kg/h | 2100*1200*1890 mm | 900 kg |
| YZS-120A | 15+1.1 kw | 250 kg/h | 220*1250*1890 mm | 1000 kg |
| YZS-130A | 18.5+1.5 kw | 400-500 kg/h | 2250*1450*2050 mm | 1300 kg |
This automatic screw press for oil extraction mostly consists of four parts: feeder, press chamber, electrical control and two vacuum filter drum. Compared to the screw oil press machine, the vacuum filter drum is the biggest difference. They make oil cleaner, the quantity and quality of oil will also rise. What’s more, this vegetable oil extraction machine is suitable for both cold pressing and hot pressing.
Main Parameter of Peanut , Soybean, Sesame Oil Making Process
| Raw Material |
Raw Material In-feed per 24 hours (KG/HR) |
Oil Output Per 100kg of Raw Material (KG) |
Dry Cake Residual |
|---|---|---|---|
| Peanut | 4000-6000 | 35-45 | 7 |
| Soybean | 4000-5000 | 10-14 | 6-7 |
| Sesame | 4000-6000 | 44-47 | 6.5-7.5 |
Superiorities of The Multifunction Screw Press for Oil Extraction:
- It contains three functions, including heating, pressing and filtering.
- User-friendly and energy-saving operation, wide vegetable seeds application, higher oil output and long-term continuous performance.
- Good after-sale service and installation and trial run service.
- We can design for you according to your special requirement.
- Continuous working but lighter noise.
- It can control the heat when oil corps pressed.
Honors of Our Screw Press Oil Extraction Machine
We have been specializing in the field of edible oil extraction for over two decades. After years of development, our factory has been equipped with advanced technology and equipment to ensure high quality machines. Besides, we have professional design teams and experienced workers. Therefore, our integrated oil extraction equipment can be the leading oil press machine in the world and is well recognized by our clients. We are the Golden Supplier of ALIBABA, we can promise the quality and price.
Matters Need Attention When You Operation
Before Operation: Firstly, you should prepare the needed auxiliaries and contains, check and adjust the tight degree. Then start the motor, the machine idle running about 15 min, check squeezer shaft speed.
Operation: When you cast oil corps into feeder, you must keep the speed well-proportioned. If you add corps too fast, the pressure in barrel will rise promptly, even cause burst event. What’s more, you should pay more attention on the oil cake’s thick.
Frequently Asked Question Of Vegetable Oil Extraction
- Machine does not go on work, and the screw axis is wrong.
This problem maybe caused by three reasons: firstly, the machine is new, and you add corps too fast. Secondly, barrel is locked by oil corps. Thirdly, there are some impurities in the oil corps, such as, stones and steel debris.
- No oil or yield efficiency is too low.
This problem maybe caused by three reasons: firstly, the water in oil corps is not suitable, oil corps is moldy, or too many impurities. You should change the oil corps, and use the high-quality oil corps. Secondly, oil discharge seam is blocked and cage bar is too tight. You should adjust the thick degree according to different oil corps and different moisture. Third, machine parts are wearing. Forth, the heat is too low, when you operate machine.
- The waste residue is too much.
This problem may be caused by two reasons: firstly, some cage bar is bending or clearance is too large. Secondly, the quality of oil corps is bad, and the pressure in barrel will rise this time. You can add some water to increase the plasticity of oil corps.
